Déformateurs en silicone / Silicone anti - mousse SD - 3020

Silicone deformers/Silicone anti-foam SD-3020

Brève description:

WynCoat®, Silicone deformer, due to their lower surface tension, silicone defoaming agents have greater defoaming action than organic defoaming agents. Organosilicon compounds (silicone oil) interfere with the surface tension of the gas-liquid interface, resulting in defoaming effect.

Envoyer un e-mail à nous

Détail du produit

Tags de produit

Détails du produit

WynCoat® SD-3020 is suitable for high solids, high build epoxy floor coatings and screen printing ink suppression foams.

Caractéristiques et avantages clés

● There is good effect to prevent foaming caused by the manufacture and construction in high solids and non-solvent epoxy coatings.

● Excellent anti-foaming property in high viscosity and thick film, especially in non-solvent and high thick film epoxy flooring coatings

Propriétés physiques techniques

Apparence: liquide translucide

Contenu actif: 100%

*Typical product data values should not be used as specifications.

Méthode d'application

• Incorporate before grinding and stirring to achieve optimum efficiency. Then, post-addition is recommended incorporate SD-3010 with sufficient mixing.

• In order to get better distribution and effects, we suggest to triturate colored paint and grinding parts together.

• Due to SD-3010’s high active content, it can be pre-diluted to 10% solution with aromatic solvent. Because the hydrophobic particles is easy to precipitate, diluted product should spent immediately.

• SD-3010 shows thixotropic properties. Viscosity may be increase in low temperature or storage, but it is normality. We suggest to stir well before use.

*The optimum dosage level depends on the required effects and should be determined through laboratory tests.